kitchen korner
in order to install this cabinet thereare some important first steps that we need to take and that has to do with theadjustment of the doors so let's take you through that right now what jay is about todemonstrate for us is the adjustment of are lazy susan doors raising and lowering them the first thing that he has to do isreach inside the cabinet and remove the shipping pin with a pair of pliers next he needs to rotate the doors to theright exposing the height adjustment screw near the bottom of the shelf then he can turn this screw to the rightto raise the doors or turn the screw to
the left in order to lower the doorsshelves may be full of products and those products do not need to beunloaded in order to make these adjustments a pdf copy of these instructions canbe located on the aristokraft website what we will demonstrate now is the adjustment of the lazy susan doors when they're not opening and closing properly the firststep is to open the door so one side of the bottom mounting bracket can be seen from there remove the shipping screw and loosen thestar washer screw
if the doors out of alignment to theleft insert the shipping screw into the rightside of the slot or reverse this if the alignment is outto the right this needs to be repeated on both sidesof the bottom mounting bracket rotate the bracket to the left or rightdepending on which way the door should go tighten the shipping screws in the dooralignment slots and close the door to check alignment this step may need to be repeated
after the door has been aligned tighten the star washer screw
Comments
Post a Comment